### Internetwork Expert BB2 Initial Config Version 4.6
enable
config t
hostname BB2
!
enable password cisco
!
clock timezone PST -8
clock summer-time PDT recurring
ip subnet-zero
no ip domain lookup
!
ipv6 unicast-routing
!
key chain RIP
key 1
key-string CISCO
!
!
!
interface Loopback0
ip address 220.20.3.1 255.255.255.0
ipv6 address 2001:220:20:3::1/64
ipv6 rip RIPng enable
!
interface Loopback1
ip address 222.22.2.1 255.255.255.0
ipv6 address 2001:222:22:2::1/64
ipv6 rip RIPng enable
!
interface Loopback3
ip address 205.90.31.1 255.255.255.0
ipv6 address 2001:205:90:31::1/64
ipv6 rip RIPng enable
!
interface Loopback51515151
ip address 51.51.51.51 255.255.255.255
ipv6 address 2001:51:51:51::51/64
!
interface Ethernet0
description Connected to SW2 Fa0/24
ip address 192.10.1.254 255.255.255.0
ip rip authentication mode md5
ip rip authentication key-chain RIP
ipv6 address 2001:192:10:1::254/64
ipv6 rip RIPng enable
ipv6 ospf 1 area 0
no shut
!
router ospf 1
router-id 192.10.1.254
redistribute connected subnets route-map LO51515151
network 192.10.1.254 0.0.0.0 area 51
!
router rip
version 2
redistribute connected metric 7 route-map LOOPBACKS
network 192.10.1.0
distribute-list prefix LOOPBACKS out
distribute-list prefix DENY_DEFAULT in
!
router bgp 254
no synchronization
bgp log-neighbor-changes
neighbor RACKS peer-group
neighbor RACKS remote-as 200
neighbor RACKS password CISCO
neighbor RACKS ebgp-multihop 255
neighbor 192.10.1.1 peer-group RACKS
neighbor 192.10.1.2 peer-group RACKS
neighbor 192.10.1.3 peer-group RACKS
neighbor 192.10.1.4 peer-group RACKS
neighbor 192.10.1.5 peer-group RACKS
neighbor 192.10.1.6 peer-group RACKS
neighbor 192.10.1.7 peer-group RACKS
neighbor 192.10.1.8 peer-group RACKS
neighbor 192.10.1.9 peer-group RACKS
neighbor 192.10.1.10 peer-group RACKS
no auto-summary
!
address-family ipv4
redistribute connected route-map LOOPBACKS
neighbor RACKS activate
neighbor RACKS route-map BGP_IN in
neighbor RACKS route-map BGP_OUT out
neighbor 192.10.1.1 peer-group RACKS
neighbor 192.10.1.2 peer-group RACKS
neighbor 192.10.1.3 peer-group RACKS
neighbor 192.10.1.4 peer-group RACKS
neighbor 192.10.1.5 peer-group RACKS
neighbor 192.10.1.6 peer-group RACKS
neighbor 192.10.1.7 peer-group RACKS
neighbor 192.10.1.8 peer-group RACKS
neighbor 192.10.1.9 peer-group RACKS
neighbor 192.10.1.10 peer-group RACKS
no auto-summary
no synchronization
exit-address-family
!
no ip http server
ip classless
!
ip as-path access-list 1 permit ^$
!
!
ip prefix-list DEFAULT seq 5 permit 0.0.0.0/0
!
ip prefix-list DENY_DEFAULT seq 5 deny 0.0.0.0/0
ip prefix-list DENY_DEFAULT seq 10 permit 0.0.0.0/0 le 32
!
ip prefix-list LOOPBACKS seq 5 permit 205.90.31.0/24
ip prefix-list LOOPBACKS seq 10 permit 220.20.3.0/24
ip prefix-list LOOPBACKS seq 15 permit 222.22.2.0/24
!
ipv6 router ospf 1
router-id 192.10.1.254
redistribute connected route-map OSPFv3_LOOPBACK
!
ipv6 router rip RIPng
distribute-list prefix-list RIPng out
!
ipv6 prefix-list OSPFv3_LOOPBACK seq 5 permit 2001:51:51:51::/64
!
ipv6 prefix-list RIPng seq 5 permit 2001:205:90:31::/64
ipv6 prefix-list RIPng seq 10 permit 2001:220:20:3::/64
ipv6 prefix-list RIPng seq 15 permit 2001:222:22:2::/64
!
route-map LO51515151 permit 10
match interface Loopback51515151
!
route-map OSPFv3_LOOPBACK permit 10
match ipv6 address prefix-list OSPFv3_LOOPBACK
!
route-map BGP_IN deny 10
match ip address prefix-list DEFAULT
!
route-map BGP_IN permit 10000
!
route-map LOOPBACKS permit 10
match ip address prefix-list LOOPBACKS
!
route-map BGP_OUT permit 10000
match as-path 1
!
privilege exec level 0 telnet
privilege exec level 0 traceroute
privilege exec level 0 ping
privilege exec level 1 terminal length
privilege exec level 1 terminal
privilege exec level 1 enable
privilege exec level 0 show ip bgp neighbors
privilege exec level 0 show ip bgp summary
privilege exec level 0 show ip bgp
privilege exec level 0 show ip route
privilege exec level 0 show ip protocols
privilege exec level 0 show ip interface brief
privilege exec level 0 show ip
privilege exec level 0 show
!
alias exec en exit
alias exec ena exit
alias exec enab exit
alias exec enabl exit
!
line con 0
exec-timeout 5 0
privilege level 1
no login
line aux 0
transport input all
line vty 0 4
exec-timeout 5 0
privilege level 0
no login
!
ntp authentication-key 1 md5 CISCO
ntp trusted-key 1
ntp master 4
!
banner exec ^

+-------------------------------------------------------------------------------+
|                                                                               |
| Welcome to BB2!  The following commands are available for use at privilege 0  |
|                                                                               |
| ping                                                                          |
| telnet                                                                        |
| traceroute                                                                    |
| show ip route                                                                 |
| show ip bgp                                                                   |
| show ip bgp neighbors                                                         |
| show ip bgp summary                                                           |
| show ip protocols                                                             |
| show ip interface brief                                                       |
|                                                                               |
| The reference configuration for this device is available at:                  |
| http://www.internetworkexpert.com/downloads/bb2.txt                           |
|                                                                               |
+-------------------------------------------------------------------------------+
^
config-register 0x2102
end
wr